BB/BA Question

[prodigy06]

I made what was meant to be a 4ml BB + .4ml BA mixture. If I was off just a little + or - 1/8th a ml or something how much a difference it would make.

[MaxRep]

Originally Posted by prodigy06

I made what was meant to be a 4ml BB + .4ml BA mixture. If I was off just a little + or - 1/8th a ml or something how much a difference it would make.

It shouldn't matter although you'll know for sure within a day or two of taking your first shot.

Your numbers seem a little unusual. What were you theoretically making, how many ML's total and what percentages were you using?

Best regards,
MaxRep

[prodigy06]

20mls tren a
14.10 ml oil
2g pellets
.40 ml BA
4.0 ml BB

sound right?

[MaxRep]

Originally Posted by prodigy06

20mls tren a
14.10 ml oil
2g pellets
.40 ml BA
4.0 ml BB

sound right?

Yeah, that's fine. The BA is a little low at only 2%, which would be considered the bare minimum, especially for something as un-sterile as pellets. Most people probably use more like 3-4%. Some people use 5% but that will usually give a bit of pain for many. Remember you'll lose a little when you filter it, for sterility purposes hopefully you're using a .2micron filter.

Good luck,
MaxRep

[prodigy06]

I'm using a .45u whatman... i used it before and it worked.
I should have used a slin pin to measure it out... I used a regular 3ml syringe. We'll see if I got it right...

[prodigy06]

i looked at my dissolving solution today and I still see some little peices of pellet in there. Think I should add more ba?