Fina conversion questions...

[-Dozer-]

I have 2 carts and I'm looking to make 80mg/ml concentration which should be about 50ml's. I'm trying to figure out what size vial to use.

Should I use a 50ml vial to dissolve both carts of pellets in the same vial then add the oil into the 50ml vial, or should I use two 30ml vials (one vial per cart) to make two separate 2 gram batches at the same concentration?

I'm just worried about the 50ml vial not having enough room to hold all the oil to get a full 50ml's after filtering and removing the gunk that settles.

Thanks!

[-Dozer-]

I'm thinking the easiest thing would be to just make 100mg/ml concentrations to make 40ml of tren.

I still don't know what size vials to use. Should I use two vials (20ml or 30ml) and make two separate 2 gram batches at 20ml a piece and then use a 50ml syringe to draw both together and then inject through a filter into four 10ml vials?

I was planning on following this format:

1) dissolve pellets in ba/bb solution
2) introduce all of my oil after pellets are dissolved and swirl around
3) allow solution to settle over night
4) draw clear oil into syringe allowing gunk to stay in vial
5) push through filter into 10 ml vials