Injection - MESO-Rx

FLDude883 · #1 (**permalink**) 10-30-2008, 12:12 AM

This is my first cycle, and as I was showing proper way how to inject, I seem to not be doing it 100%. Each time I turn the vile upside down with the needle in, I pull down the plunger very slowly but still seem to get bubbles. What's the secret or technique to avoid bubbles or get rid of them if they do get in the syringe. I have heard of pulling the plunger all the way down to get nothing but air, then inject the air in the vile making it easier. Is this a good thing to do? Any help would be greatly appreciated.

RockHard · #2 (**permalink**) 10-30-2008, 12:53 AM

Try heating the steroids under warm water, then pull air into the syringe, inject the air into the vial, turn it upside down and slowly pull it out. If there are bubbles you can usually flick the syringe with your finger a few times and it will bring them to the surface. Also, you might be using to small of a pin, i like to draw with an 18 gage needle then replace it with a 22 gage to inject...what size are you drawing with?

Little Man Syndrome · #3 (**permalink**) 10-30-2008, 01:08 AM

Well i am glad you atleast knew to tight the needle to the sryinge. i had given others injections but was so bewildered i was gunna stick myself. Forgot to tighten it and when i pushed thick omnidren they seperated and i lost a buch of oil.
I am assuming your doing it in the Glute
My frist tip would be do it in one shot, fucking around makes it worse.

Second, if it isn't all the way through the fatty tissue slide it in all the way. I fucked myself up,more then a CC in your ass fat seems to scar. Anyone have any knowledge with this? It has only been 3 weeks since i did it i got a knot in my ass that feels like it may never go away. nd know i am out of ass room on that side. so i am thinkin in the leg. Will my ass recover.

Third, i have somone else do it. I definatly don't mean a gym buddy. Shit my boy stickin me....no fucken way. I have this cool chick who i used to stick (With needle) do it for me. she is pro but not always around.

Finally. i don't think it needle hurt that bad. But i find if i streach the skin and just spin the needle on it to it pops in then slowly slide it in all the way. sounds horrific but i can't every feel it at all. like it isn't even really happening. but your ass will be sore longer.

as far as technique comes with time. i proply done it myself 45 times but i seem to get worse at
it. stretch the skin and have at it. Be sterile as possible good luck

Little Man Syndrome · #4 (**permalink**) 10-30-2008, 01:15 AM

I draw with 23 and it is slow but doesn't bouble badly plus my bubble come right out.
I push alittle excess out to lube needle.

I think it would depend on your gear, mine seems alttle thicker this time but aslong as i push the right amount of air in it pushes the plunger back itself. i help it out to be quick.

FLDude883 · #5 (**permalink**) 11-11-2008, 02:16 PM

Gotcha, I have been using 23 and 25 gauges, I am lazy so I haven't been switching the needle once I draw, just put it right in, not too bad gets sore once in a while. My other question is...I am using Tren e and Test c, seems like I have gone through the tren a lot faster than the test, I thought I have been using the same amount, every 3 days for each, maybe not. Should I just slow down on the tren or maybe separate them to 4 days and just not do as much?

Lizard King · #6 (**permalink**) 11-11-2008, 02:26 PM

Injecting air into the vial does help with the pressure but you may still get some bubbles. Simply turn the syringe upside down and flick it with your finger a few times. The bubbles should all rise to the top and you should be able to release them if you like.

solo47 · #7 (**permalink**) 11-11-2008, 03:26 PM

Just draw with an 18 g needle and you'll get no bubbles. Don't even have to invert the bottle. You'll like the ease of it and be glad you tried it. Takes but a second to switch to your 23 g injection needle.

But if you want to keep fumbling all day with bubbles & slow draw it's up to you.

Solo

toughguy99 · #8 (**permalink**) 11-11-2008, 05:34 PM

solo wacked the nail right on there head there lol

jasthace · #9 (**permalink**) 11-11-2008, 06:27 PM

Quote:

Originally Posted by solo47

Just draw with an 18 g needle and you'll get no bubbles. Don't even have to invert the bottle. You'll like the ease of it and be glad you tried it. Takes but a second to switch to your 23 g injection needle.

But if you want to keep fumbling all day with bubbles & slow draw it's up to you.

Solo

Thats how I do it too,I also cock the barrel with air before inserting it into the vial for the benefit of air pressure.